سطح أكريليك صلب معدّل KKR-M1705
شرح المميزات:
- اللون: KKR-
- المقاس: 3660x760 مم / 3050x760 مم / 3050x900 مم / 2440x1220 مم
- سمك: 6-30mm
- تتوفر أحجام مخصصة أخرى
- شهادة CE وتقارير الاختبار الكاملة من SGS
KKR-M1705 is a modified acrylic solid surface sheet offered in standard and customized formats with a listed 6–30 mm thickness range. Its strongest page angle is coordinated interior use across several fabricated elements rather than a single countertop application.
The buyer should be guided through color approval, surface relationships, thickness selection, edge treatment, wall and furniture details, sample review under project lighting, and consistent use across the design package.
| المواصفات الخاصه | تفاصيل |
|---|---|
| الموديل | كيه كيه آر-M1705 |
| نوع المنتج | Modified acrylic solid surface sheet |
| مرجع اللون | كيه كيه آر-M1705 |
| الأحجام القياسية | 3660 × 760 مم؛ 3050 × 760 مم؛ 3050 × 900 مم؛ 2440 × 1220 مم |
| نطاق السماكة | 6 – 30 مم |
| حجم مخصص | متوفر حسب متطلبات المشروع |
| توثيق | CE certificate and SGS testing reports are listed on the current product page; request the applicable documents for the intended project |
KKR-M1705 can support interior programs that combine counters, furniture tops, wall panels, shelving, and reception features around one selected color reference.
| سيناريو التطبيق / المشتري | ملاءمة |
|---|---|
| Coordinated Retail Interiors | Use the same approved material direction across counters, displays, wall details, and furniture. |
| Hospitality Public Areas | Link reception, table, shelving, and decorative surfaces within one design palette. |
| مجموعات أثاث الحمام | Coordinate vanity tops, shelves, and related surfaces around an approved sample. |
| Office and Commercial Fit-Out | Apply the material to several fabricated elements while controlling thickness and edge details. |
| بند التخطيط | التفاصيل للتأكيد |
|---|---|
| Build a Material Board | Review the physical sheet sample beside cabinet, flooring, wall, metal, and lighting finishes. |
| Assign Thickness by Element | Select thickness according to each counter, panel, shelf, or furniture application. |
| Standardize Edge Details | Define which elements use square, eased, built-up, or other approved edge profiles. |
| Map Material Locations | List every surface using KKR-M1705 to control quantities and installation sequencing. |
| Coordinate Batch Supply | Plan project phases and batch requirements when several areas must maintain a consistent appearance. |
The following results are material-level references from the provided KKR solid surface test report. They do not establish SKU-specific certification or suitability for every market. Request the applicable report and project documents for review.
| عنصر اختبار | نتيجة تم التحقق منها | طريقة اختبار |
|---|---|---|
| كثافة واضحة | 1773 كجم / م 3 | إن شنومكس-شنومكس: شنومكس |
| امتصاص الماء | 0.03% | إن شنومكس-شنومكس: شنومكس |
| قوة العاطفة | 56.4 ميغاباسكال | إن شنومكس-شنومكس: شنومكس |
| صلابة باركول | 62 | ISO 19712-2:2007 القسم 15 و ASTM D2583-13a |
| مقاومة كيميائية | التصنيف C4 | إن شنومكس-شنومكس: شنومكس |
| مقاومة البقع | Pass in the report summary for the tested agents and conditions | EN 14617-10:2012, Annex A |
| رد فعل على حريق | ب-س1، د0 | EN 13501-1:2007+A1:2009 |
| السيليكا البلورية | لم يتم العثور على قمم مميزة للسيليكا البلورية | FTIR, EDX and XRD |
For fabricated surfaces, clean with a soft cloth or non-abrasive sponge and a mild detergent, then remove residue with clean water. Avoid aggressive abrasives and unapproved chemicals. Follow the fabricator’s instructions for heat protection, cutting, impact prevention, seams, support, and repair.
It can be evaluated for counters, vanity tops, wall panels, shelving, furniture, reception features, and other fabricated surfaces.
A physical board shows how the selected sheet works with lighting, cabinet, floor, wall, and metal finishes.
No. Thickness should be selected according to the specific component, span, support, and fabrication detail.
Create a location schedule and cutting plan for every counter, panel, shelf, and furniture item.
The current page states that customized sizes can be supplied according to project requirements.
Send the interior material board, surface-location schedule, required thickness by application, fabrication drawings, project phases, quantity, and sample needs to coordinate KKR-M1705 across the design.
خبراء الأسطح الصلبة KKR في خدمتكم على مدار 7 ساعة طوال أيام الأسبوع.
