KKR M1696 1
KKR M1696 1
KKR M1696 2
KKR M1696 3
KKR M1696 4

Gemodificeerd acryl massief oppervlak KKR-M1696

Kenmerken

  • Kleur: KKR-1696
  • Afmetingen: 3660x760mm / 3050x760mm / 3050x900mm / 2440x1220mm
  • Dikte: 6-30mm
  • Andere aangepaste maten beschikbaar
  • CE-certificaat en volledige SGS-testrapporten

Specify KKR-M1696 for OEM and Fabricated Component Production

KKR-M1696 is a modified acrylic solid surface sheet available in standard formats, a listed 6–30 mm thickness range, and customized sizes. The page should focus on manufacturers and project suppliers converting sheet material into repeatable finished components.

For OEM or fabricated-product programs, buyers need to define the component drawing, annual or project volume, cutting pattern, edge treatment, holes and cutouts, backing, packaging, labeling, tolerances, and the level of processing required from KKR.

Specificaties van het product

SpecificatiesDetails
ModelKKR-M1696
ProducttypeModified acrylic solid surface sheet
KleurreferentieKKR-1696
Standaard maten3660 × 760 mm; 3050 × 760 mm; 3050 × 900 mm; 2440 × 1220 mm
Dikte bereik6 – 30 mm
Aangepaste grootteBeschikbaar afhankelijk van de projectvereisten.
DocumentatieCE certificate and SGS testing reports are listed on the current product page; request the applicable documents for the intended project

Projecttoepassingen

KKR-M1696 can support vanity components, furniture parts, shelves, tabletop elements, wall pieces, counters, and other repeatable fabricated products supplied to brands, distributors, or project contractors.

Toepassing geschiktheid

Toepassings-/kopersscenarioGeschiktheid
Bathroom Component ManufacturingProduce vanity tops, shelves, backsplashes, and coordinated parts from controlled drawings.
Furniture and Table ComponentsConvert the sheet into repeatable tops or panels with defined edges and cutouts.
Private-Label Product ProgramsCoordinate dimensions, processing, labels, packing, and replacement references.
Project Kit SupplyPackage fabricated components by room, unit, or installation zone.

Project- en inkoopvereisten

PlanningsitemGegevens ter bevestiging
Define the Finished ComponentProvide dimensions, tolerances, edge profiles, cutouts, holes, backing, and finish.
Choose the Processing LevelState whether the order is for raw sheets, cut blanks, semi-finished parts, or completed components.
Validate a Pilot SampleApprove one production sample before the larger batch.
Set Packaging by ComponentProtect finished edges and label parts by model, room, or assembly.
Plan Repeat OrdersRetain drawings, samples, inspection criteria, and order references for future production.

Verified Material Performance

The following results are material-level references from the provided KKR solid surface test report. They do not establish SKU-specific certification or suitability for every market. Request the applicable report and project documents for review.

Test ItemGeverifieerd resultaatTest methode
schijnbare dichtheid1773 kg / m3EN 14617-1: 2013
Waterabsorptie0.03%EN 14617-1: 2013
Buigsterkte56.4 MPaEN 14617-2: 2016
Barcol-hardheid62ISO 19712-2:2007 Sectie 15 en ASTM D2583-13a
Chemische weerstandClassificatie C4EN 14617-10: 2012
VlekbestendigheidPass in the report summary for the tested agents and conditionsEN 14617-10:2012, Annex A
Reactie op vuurB-s1, d0EN 13501-1:2007+A1:2009
Kristallijn silicaKarakteristieke pieken van kristallijn siliciumdioxide werden niet gevonden.FTIR, EDX and XRD

Verzorging en onderhoud

For fabricated surfaces, clean with a soft cloth or non-abrasive sponge and a mild detergent, then remove residue with clean water. Avoid aggressive abrasives and unapproved chemicals. Follow the fabricator’s instructions for heat protection, cutting, impact prevention, seams, support, and repair.

Veelgestelde Vragen / FAQ

Can KKR-M1696 be supplied as fabricated components?

It can be evaluated for component production when drawings, processing scope, tolerances, and packaging are agreed.

What is the difference between raw sheet and component supply?

Raw sheet orders leave fabrication to the buyer, while component programs define cutting, edges, holes, and other processing.

Why is a pilot sample required?

It confirms dimensions, finish, processing quality, and packing before the full batch.

How should repeat orders be controlled?

Retain approved drawings, samples, inspection criteria, labels, and previous order references.

What thickness range is listed?

The current page lists 6–30 mm.

Projectaanvraag

Send the component drawings, processing scope, tolerances, thickness, annual or project quantity, pilot-sample requirement, labels, and packaging standard to evaluate KKR-M1696 for OEM production.

Productdetails KKR-M1696 1
Productdetails KKR-M1696 2
Productdetails KKR-M1696 3
Productdetails KKR-M1696 4
Productdetails KKR-M1696 5
Productdetails KKR-M1696 6
Productdetails KKR-M1696 7
Productdetails KKR-M1696 8
Productdetails KKR-M1696 9

Geef uw bedrijf een boost met KKR Solid Surface!

Contact

KKR, expert in massieve oppervlakken, staat 24/7 voor u klaar.