KKR-M8873 is a matt solid surface shower-wall panel system designed for projects that need a coordinated marble-look enclosure rather than a collection of small wall finishes. The page lists a 96 × 60 inch main panel format, several side-panel widths, and 6 mm or 8 mm thickness choices.
This page should function as a planning guide. The buyer needs to understand how the available panel sizes relate to the actual enclosure, corners, niches, valves, shower heads, doors, waterproofing, and site-cutting conditions before a panel quantity is confirmed.
| Specification | Details |
|---|---|
| Model | KKR-M8873 |
| Product Type | Solid surface shower wall panel set |
| Material | Solid surface |
| Color / Pattern | KKR-M8873 marble texture |
| Surface Finish | Matt |
| Main Listed Size | 96 × 60 inches |
| Side Panel Widths | 30 / 32 / 36 / 42 / 48 inches |
| Thickness | 6 mm or 8 mm |
M8873 is most useful where the wall layout can be planned as a panel system. Instead of presenting only broad bathroom applications, the page should help contractors and procurement teams decide whether the listed formats fit the enclosure and where cuts, joints, and penetrations will occur.
| Application / Buyer Scenario | Suitability |
|---|---|
| New Hotel Bathroom Programs | Use the listed formats to standardize back and side walls across repeated rooms while controlling joints and penetrations. |
| Bathroom Renovation Packages | Evaluate existing wall dimensions, substrate condition, access, and on-site cutting before replacing older finishes. |
| Apartment Developments | Coordinate panel schedules with plumbing rough-ins, niches, shower doors, and phased delivery. |
| Bathroom Showroom Displays | Present the M8873 pattern as a complete enclosure concept rather than as an isolated decorative panel. |
| Planning Item | Details to Confirm |
|---|---|
| Step 1 — Measure the Enclosure | Provide finished wall dimensions after allowing for wall build-up, corners, and shower-door profiles. |
| Step 2 — Mark Every Penetration | Show valves, outlets, shower heads, niches, shelves, grab bars, and other openings on the drawing. |
| Step 3 — Select Panel Thickness | Choose 6 mm or 8 mm according to the approved substrate, handling plan, and installation method. |
| Step 4 — Approve Pattern Direction | Confirm how the marble movement should continue or change between the back and side walls. |
| Step 5 — Confirm Packing Sequence | Label panels by room or wall position so the installation team can identify each piece on site. |
Clean the panels with a mild bathroom cleaner and a soft cloth or non-abrasive sponge. Remove cleaner residue with clean water and avoid aggressive abrasives or unapproved chemicals. Inspect panel joints, sealant, corners, and plumbing penetrations as part of the bathroom maintenance plan.
Start with the finished enclosure dimensions, then map the listed back and side-panel formats to the actual walls and planned site cuts.
That depends on the approved drawing, site tolerances, packing, and installation plan. Provide all penetration locations before production.
Both thicknesses are listed on the page. The project team should select one after reviewing the substrate, handling, fixing, and installation requirements.
Yes, provided each room type has an approved panel schedule and consistent plumbing and enclosure dimensions.
Inspect joints, sealant, corners, penetrations, and transitions to the shower tray or floor as part of routine bathroom maintenance.
Send the finished enclosure drawing with each wall dimension, niche and plumbing locations, selected thickness, room quantity, panel labeling needs, and installation method to build a project-specific panel schedule.
KKR solid surface expert is at your service 7/24.
