The 30mm Pure Acrylic Solid Surface Sheet from KKR Stone is a thick, PMMA-based surfacing material designed for fabricated architectural and interior applications. Its substantial 30mm profile and heat-forming capabilities make it a practical option for custom countertop designs, curved reception desks, furniture components, and other made-to-measure installations.
Unlike natural stone, which requires mechanical cutting and shaping, this pure acrylic solid surface can be cut, joined, and thermoformed using appropriate fabrication equipment. Its non-porous construction offers water resistance and simplifies routine cleaning in kitchens, bathrooms, and commercial interiors.
Four standard sheet formats accommodate different cutting layouts, while KKR Stone’s manufacturing services support project-specific design requirements.
For countertop fabricators, contractors, architects, and wholesale buyers, this material provides a combination of fabrication flexibility, solid surface aesthetics, and custom manufacturing support. The final design, structural support, and thermoforming requirements should be assessed according to the chosen application.
The 30mm (1.18-inch) thickness provides a substantial material profile for thick countertops, furniture components, and architectural surface designs. Fabricators can incorporate this thickness into projects requiring a pronounced solid surface edge.
Manufactured using a pure acrylic solid surface formulation based on polymethyl methacrylate (PMMA), the sheet supports precision fabrication and customised interior designs.
The material can be heated and formed into curved or irregular shapes under controlled fabrication conditions, allowing designers to develop rounded counters and other architectural details that are difficult to achieve with natural stone.
Its non-porous surface resists routine water penetration and offers easy-clean characteristics, making it suitable for consideration in bathroom vanities, kitchen countertops, and frequently used interior surfaces.
The manufacturer describes its pure acrylic solid surface as impact-resistant. This characteristic supports use in busy interior spaces, although the material can still be damaged by excessive force or improper handling.
With suitable joint preparation and compatible colour-matched bonding materials, fabricators can create visually discreet joints between solid surface components, supporting continuous countertop and furniture designs.
The sheets can be cut and fabricated to accommodate approved dimensions, openings, profiles, and other project-specific details, helping manufacturers produce tailored components.
Different sheet lengths and widths provide flexibility when planning countertop runs, furniture surfaces, and commercial fabrication layouts. Appropriate sheet selection can help reduce unnecessary material waste.
Routine cleaning with appropriate mild products helps maintain the appearance of the finished material, making it practical for residential and commercial interiors.
| Specification | Product Details |
| Product Name | 100% Pure Acrylic Solid Surface in 30mm Thickness KKR Solid Surface |
| Product Identifier | KKR-SOLID-SURFACE |
| Product Category | 100% Pure Acrylic Solid Surface Sheets |
| Material | Pure Acrylic Solid Surface |
| Resin System | PMMA-Based Acrylic |
| Nominal Thickness | 30 mm (1.18 inches) |
| Standard Size 1 | 3050 × 760 mm (120.08 × 29.92 inches) |
| Standard Size 2 | 3060 × 900 mm (120.47 × 35.43 inches) |
| Standard Size 3 | 3660 × 760 mm (144.09 × 29.92 inches) |
| Standard Size 4 | 2440 × 1220 mm (96.06 × 48.03 inches) |
| Surface Structure | Non-Porous |
| Fabrication Characteristics | Cuttable, Shapeable, Thermoformable |
| Surface Properties | Water-Resistant, Impact-Resistant |
| Colour Availability | Multiple colours and patterns; model-specific options subject to confirmation |
| Surface Finish | Confirm with Manufacturer |
| Customization | Project-Specific Cutting, Shaping and Fabrication Subject to Approval |
| Listed Certifications / Testing | CE, SGS |
| Sample Availability | Free Sample Box Available |
| Manufacturer | KKR Stone |
| Manufacturing Location | China |
KKR Stone’s pure acrylic solid surface collection includes multiple colours and decorative patterns for different interior design requirements.
The available colours and patterns specifically offered for this 30mm product have not been individually identified. Buyers should confirm which selections can be manufactured at the required thickness before specifying a colour.
Surface finish options also require confirmation, particularly for projects requiring consistent appearance across multiple sheets or fabricated components.
Architects, furniture manufacturers, and distributors can explore KKR Stone’s Solid Surface Colour Inspiration to identify potential design directions.
Physical samples are recommended for reviewing colour consistency, pattern appearance, and finish characteristics under actual project lighting.
KKR Stone supports custom solid surface fabrication for projects requiring more than standard rectangular sheets.
The 30mm pure acrylic material is particularly relevant to designs involving curved profiles, irregular shapes, and custom architectural components.
Available manufacturing services include project-specific cutting, shaping, thermoforming, and fabrication. Custom sheet dimensions, colours, patterns, and specialised OEM or ODM requirements are subject to technical review and manufacturer confirmation.
This approach allows contractors, architects, distributors, and project managers to coordinate their material selection with the required fabrication process.
Discuss your specifications through KKR Stone’s Customization Services.
The thick profile supports customised countertop designs, including substantial exposed edges, shaped corners, and made-to-measure surface layouts. Suitable support and heat protection remain important.
Its non-porous construction and water-resistant characteristics make it a practical material for fabricated vanity tops and coordinated bathroom surface designs.
Thermoforming capabilities allow fabricators to explore curved reception counter designs, rounded profiles, and distinctive commercial furniture features.
The material can be incorporated into custom counters, guestroom vanity installations, and selected interior furniture components requiring coordinated surface finishes.
Custom acrylic solid surface components can support reception areas, service counters, display surfaces, and other high-visibility interior features.
Furniture manufacturers and interior contractors can use appropriately fabricated sheets for tables, decorative panels, and bespoke architectural surfaces, subject to structural and installation requirements.
Clean finished acrylic solid surface components with warm water, mild detergent, and a soft, non-abrasive cloth. Rinse away cleaning residue and dry with a clean cloth.
Wipe up spills promptly, particularly strongly coloured liquids. Avoid leaving staining substances in prolonged contact with the surface.
Use cutting boards for food preparation and trivets for hot cookware. Do not expose the material to direct flames, excessive heat, or sharp impacts.
Minor surface marks may be repairable through professional refinishing, depending on their depth, the colour, and the finish. Contact KKR Stone for approved repair recommendations before sanding or applying polishing compounds.
Inspect heavily used surfaces periodically for damage, loose joints, and changes in appearance. Use the manufacturer’s approved maintenance procedures for the installed finish.
A 30mm Pure Acrylic Solid Surface Sheet is a thick manufactured surfacing material based on an acrylic resin system. KKR Stone’s version is intended for custom countertop, furniture, and architectural fabrication, with four standard sheet sizes and the ability to create curved forms through controlled thermoforming.
Yes. This material can be fabricated into kitchen countertops when appropriate design, support, and installation requirements are met. Its non-porous surface simplifies cleaning, while the 30mm thickness supports substantial countertop profiles. Direct exposure to very hot cookware should be avoided.
Yes. KKR Stone identifies thermoforming as a capability of its pure acrylic solid surface material. Curved and irregular components can be developed through controlled heating and shaping. However, achievable bend radii, equipment settings, and forming limits must be confirmed for the 30mm thickness.
Four standard sizes are listed: 3050 × 760 mm, 3060 × 900 mm, 3660 × 760 mm, and 2440 × 1220 mm. These formats allow fabricators to select material according to their cutting plans. Contact KKR Stone to discuss non-standard dimensions.
KKR Stone provides broader custom colour and pattern development services. However, individual colour codes and decorative options available specifically in 30mm pure acrylic have not been confirmed. Submit your desired colour reference and request written confirmation and a physical sample.
Yes, subject to fabrication feasibility. The sheet’s thermoforming characteristics make it relevant to custom reception counters and rounded furniture components. The final design should account for material thickness, forming limits, joint locations, structural support, and the approved manufacturing method.
KKR Stone serves professional buyers through solid surface manufacturing and custom fabrication services. Distributors, fabricators, and commercial purchasers can submit bulk and OEM project enquiries. Minimum order quantities, pricing, production capacity allocation, and delivery arrangements are confirmed according to the specific requirements.
Yes. KKR Stone lists a free sample box for this product. Buyers can use samples to review material appearance and discuss suitability before finalising specifications. Contact the manufacturer to confirm available colours, sample contents, delivery arrangements, and quotation requirements.
This 30mm pure acrylic solid surface sheet is a fabrication material rather than a ready-to-install countertop. Cutting, joining, shaping, and installation should be performed by qualified solid surface professionals.
Review the sheet dimensions, thickness, installation location, cutouts, edge details, and approved project drawings. Ensure all measurements reflect actual site conditions.
Check each sheet for visible damage and confirm the selected colour and appearance before fabrication. Plan cutting layouts and joint locations to minimise unnecessary waste.
Verify that the cabinets, framework, or substrates provide adequate support for the finished 30mm components. Follow approved structural and installation details.
Use suitable solid surface fabrication equipment to cut the material, create necessary openings, and form required edge profiles. Avoid unsupported cutting practices that could damage the sheet.
Curved components should be produced using manufacturer-approved thermoforming procedures. Heating conditions and achievable shapes must be established specifically for the 30mm material.
Where multiple pieces are required, prepare compatible joints and use an approved bonding system. Complete sanding and finishing according to the specified surface appearance.
Dry-fit fabricated sections, check alignment and support, and secure them using the approved installation method. Coordinate countertop openings and related fixtures where applicable.
Inspect joints, exposed edges, surface appearance, and overall installation. Clean the surface using approved products and protect it from damage during remaining construction activities.
All fabrication and installation work should follow KKR Stone’s current technical documentation and approved project drawings.