Modified Acrylic Solid Surface KKR-M1705

Features

Color: KKR-
Size: 3660x760mm / 3050x760mm / 3050x900mm / 2440x1220mm
Thickness: 6-30mm
Other customized size available
CE Certificate and Full SGS Testing Reports

Coordinate KKR-M1705 Across Furniture, Wall, and Counter Surfaces

KKR-M1705 is a modified acrylic solid surface sheet offered in standard and customized formats with a listed 6–30 mm thickness range. Its strongest page angle is coordinated interior use across several fabricated elements rather than a single countertop application.

The buyer should be guided through color approval, surface relationships, thickness selection, edge treatment, wall and furniture details, sample review under project lighting, and consistent use across the design package.

Product Specifications

Specification	Details
Model	KKR-M1705
Product Type	Modified acrylic solid surface sheet
Color Reference	KKR-M1705
Standard Sizes	3660 × 760 mm; 3050 × 760 mm; 3050 × 900 mm; 2440 × 1220 mm
Thickness Range	6–30 mm
Customized Size	Available according to project requirements
Documentation	CE certificate and SGS testing reports are listed on the current product page; request the applicable documents for the intended project

Project Applications

KKR-M1705 can support interior programs that combine counters, furniture tops, wall panels, shelving, and reception features around one selected color reference.

Application Suitability

Application / Buyer Scenario	Suitability
Coordinated Retail Interiors	Use the same approved material direction across counters, displays, wall details, and furniture.
Hospitality Public Areas	Link reception, table, shelving, and decorative surfaces within one design palette.
Bathroom Furniture Collections	Coordinate vanity tops, shelves, and related surfaces around an approved sample.
Office and Commercial Fit-Out	Apply the material to several fabricated elements while controlling thickness and edge details.

Project and Procurement Requirements

Planning Item	Details to Confirm
Build a Material Board	Review the physical sheet sample beside cabinet, flooring, wall, metal, and lighting finishes.
Assign Thickness by Element	Select thickness according to each counter, panel, shelf, or furniture application.
Standardize Edge Details	Define which elements use square, eased, built-up, or other approved edge profiles.
Map Material Locations	List every surface using KKR-M1705 to control quantities and installation sequencing.
Coordinate Batch Supply	Plan project phases and batch requirements when several areas must maintain a consistent appearance.

Verified Material Performance

The following results are material-level references from the provided KKR solid surface test report. They do not establish SKU-specific certification or suitability for every market. Request the applicable report and project documents for review.

Test Item	Verified Result	Test Method
Apparent Density	1773 kg/m3	EN 14617-1:2013
Water Absorption	0.03%	EN 14617-1:2013
Flexural Strength	56.4 MPa	EN 14617-2:2016
Barcol Hardness	62	ISO 19712-2:2007 Section 15 and ASTM D2583-13a
Chemical Resistance	Classification C4	EN 14617-10:2012
Stain Resistance	Pass in the report summary for the tested agents and conditions	EN 14617-10:2012, Annex A
Reaction to Fire	B-s1, d0	EN 13501-1:2007+A1:2009
Crystalline Silica	Characteristic peaks of crystalline silica were not found	FTIR, EDX and XRD

Care and Maintenance

For fabricated surfaces, clean with a soft cloth or non-abrasive sponge and a mild detergent, then remove residue with clean water. Avoid aggressive abrasives and unapproved chemicals. Follow the fabricator’s instructions for heat protection, cutting, impact prevention, seams, support, and repair.

Frequently Asked Questions

Where can KKR-M1705 be used in one project?

It can be evaluated for counters, vanity tops, wall panels, shelving, furniture, reception features, and other fabricated surfaces.

Why should buyers create a material board?

A physical board shows how the selected sheet works with lighting, cabinet, floor, wall, and metal finishes.

Should every application use the same thickness?

No. Thickness should be selected according to the specific component, span, support, and fabrication detail.

How should quantities be planned?

Create a location schedule and cutting plan for every counter, panel, shelf, and furniture item.

Are customized sizes available?

The current page states that customized sizes can be supplied according to project requirements.

Project Inquiry

Send the interior material board, surface-location schedule, required thickness by application, fabrication drawings, project phases, quantity, and sample needs to coordinate KKR-M1705 across the design.