KKR-T005 is an acrylic solid surface shower tray with a listed size of 800 × 800 × 50 mm. It is offered in pure white with other colors stated as available, and the page lists matt or glossy surface options.
For project use, the tray should be coordinated with the finished floor level, waterproofing system, waste position, drainage capacity, enclosure dimensions, wall build-up, and access for maintenance. Anti-slip performance, load capacity, and certificate scope should not be assumed from general marketing language.
| Specification | Details |
|---|---|
| Model | KKR-T005 |
| Product Type | Solid surface shower tray |
| Size | 800 × 800 × 50 mm |
| Material | Acrylic solid surface |
| Surface | Matt or glossy |
| Color | Pure white; other colors stated as available |
| Certification | CE, SGS, CUPC are consistently site-listed for KKR-T005, T005-B, and T005-C; certificate numbers, validity, market, and SKU scope still require document verification |
| Warranty | 5 years is consistently site-listed for KKR-T005, T005-B, and T005-C; written terms and exclusions still require verification |
The compact square format is suitable for bathrooms where an 800 mm shower footprint has been allocated. It can be considered for hotel guestrooms, apartments, residential renovations, and modular bathroom packages after the drainage and waterproofing interfaces are approved.
| Application / Buyer Scenario | Suitability |
|---|---|
| Hotel Guestrooms | Coordinate tray level, enclosure dimensions, waste access, and housekeeping requirements across repeated rooms. |
| Apartment Bathrooms | Suitable for compact shower layouts when the structural opening and finished wall dimensions match the tray. |
| Residential Renovation | Check existing drain position, floor build-up, doorway access, and waterproofing before ordering. |
| Modular Bathroom Programs | Can be evaluated for repeatable bathroom units after drawing, tolerance, packing, and installation review. |
| Planning Item | Details to Confirm |
|---|---|
| Drainage | Confirm waste location, outlet size, drainage capacity, trap access, and whether a waste cover is included. |
| Waterproofing Interface | Coordinate tray edges, wall membrane, sealant joints, upstands, and finished floor level. |
| Safety Documentation | Request the applicable anti-slip or wet-surface test documentation if the project specification requires it. |
| Color and Finish | Approve the selected color and matt/glossy finish by sample. |
| Certification and Warranty | Confirm certificate numbers, tested product, market scope, and written five-year warranty terms. |
Clean with a mild bathroom cleaner and a non-abrasive sponge. Keep the waste and trap accessible and remove residue that could reduce drainage. Do not use aggressive abrasives or chemicals not approved for the selected finish. Inspect sealant and waterproofing joints according to the installer’s maintenance plan.
The page lists 800 × 800 × 50 mm. Confirm dimensional tolerances and the finished installation drawing.
The current feature list identifies acrylic solid surface.
Yes, both are listed. Confirm availability for the selected color and project quantity.
No specific anti-slip test value is shown in the visible specifications. Request the relevant report if the project requires a classification.
The page lists these terms, but the current documents and their exact scope must be checked before making a compliance claim.
Send the shower opening, finished wall dimensions, floor build-up, waste position, outlet requirement, finish, quantity, destination market, and required test documents for technical confirmation and quotation.
KKR solid surface expert is at your service 7/24.
